CityGML Utility Network ADE workshop 2017 March - Karlsruhe, Germany

From SIG3D UtilityNetworks Wiki EN
Revision as of 15:35, 1 April 2019 by Tkutzner (talk | contribs) (→‎Aim of the workshop)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
2nd joint SIG 3D and OGC workshop on the CityGML Utility Network ADE
Karlsruhe (Germany), 2-3 March 2017
  201303 SIG3D Logo.png OGC Logo 2D Blue No Border.png Kit logo de farbe positiv.jpg EIFER logo.jpg

All presentations and workshop results can be accessed here: Agenda and results of the Karlsruhe workshop March 2017

20170302 Utn ADE participants.jpg

Aim of the workshop

The OGC, the SIG 3D and EIFER will host a joint international workshop regarding the development of a CityGML ADE for utility networks.
It will be the opportunity to gather requirements, ideas, suggestions, and positive as well as negative experience from CityGML users, data producers, software vendors, and scientists developing and using a CityGML UtilityNetworkADE.
Aim of the workshop is to discuss and define a harmonized version of a CityGML UtilityNetworksADE and other development tools like libraries for wide spread use in the development of applications based on utility networks.

Agenda and addressed topics

This is a short version of the agenda.
The detailed agenda can be accessed here: Agenda of the Workshop.

  • Thursday, 2 March 2017
    • 12:00-12:30 Welcome address and round of introductions
    • 12:30-15:00 Recap and continuation of open tasks from the Munich workshop
    • 15:30-16:00 Prioritisation of use cases
    • 16:00-18:00 Analysis of selected use cases regarding their current support by the UtilityNetworkADE

On Thursday evening a joint dinner will take place at a traditional restaurant or beer cellar in Karlsruhe. The directions: Hoepfner Burghof

  • Friday, 3 March 2017
    • 09:00-12:00 Work on enhancing the support of the selected use cases by the UtilityNetworkADE data model
    • 12:00-13:00 Discussion of the next steps

We would like to invite new participants/organisations to give a 3-minute introduction of him/herself in the round of introductions by preparing two presentation slides:

  • One slide on the expectations or interest in this workshop/in the UtilityNetworkADE
  • One slide on use cases the UtilityNetworkADE is required for

Please send these slides to Tatjana Kutzner before March 1, 2017.


The workshop will take place on March 2-3, 2017 at EIFER, the European Institute For Energy Research in Karlsruhe, Germany.
Further information on the venue can be found here: Venue

Who should participate

If you are a CityGML user, data producer, software vendor or a scientist working on or using utility networks based on CityGML, you are encouraged to participate in the workshop.
If you are involved in simulations but not yet familiar with CityGML and interested in an interoperable and compatible exchange model for city simulations you are also welcome.


Please send an e-mail with Name / Company / E-mail address to Tatjana Kutzner.

Registration is necessary. Be aware that the number of participants is limited. The deadline for registration is: 2017-02-22.

Costs of participation

The event is sponsored by EIFER. Hence, participation is free of charge including coffee breaks.
Costs for travel and accommodation will be at the participants own expense.

Organizing Committee

Alexandru Nichersu EIFER
Ingo Simonis Open Geospatial Consortium
Egbert Casper SIG 3D of the Geodata Infrastructure Germany


For any questions regarding the workshop, please contact Tatjana Kutzner.

The workshop is hosted and supported by EIFER logo.jpg